The Mini Orange Pump is designed to be installed:
• above the false ceiling where possible
• in plastic trunking conduit
• behind wall mounted evaporators

By connecting the drain hose to the reservoir and placing the pump drive unit within the evaporator, condensate water can be pumped to a height of 8 metres (28ft).

Within the Mini Orange kit there are two reservoirs to choose from, one allows you to connect directly to the drain hose of the evaporator and the second reservoir can be placed directly into a condensate tray, providing it is sitting flat and horizontal.

View Datasheet

The Mini Lime is a small, quick and easy to install
Mini Pump.

The pump is clipped directly onto the reservoir so
there is minimal suction lift. By connecting the drain
hose to the reservoir of the pump unit, condensate
water can be pumped to a height of 8 metres (28ft.)

The Mini Lime Pump fits securely into four specially designed elbows. These hold the pump horizontally to ensure reliable operation, and as the pump and elbows
are reversible they can be installed easily on either side of an evaporator unit.

View Datasheet

1/4" Polyester re-enforced braided fibre PVC hose for condensate pumps.
Can be supplied in any length up to 30m coils.

Interconnecting pipe extension kits for all our air-conditioning systems.
The copper pipes are supplied pre insulated with flare nut ends and inline connectors for easy installation to existing pipe work.

Available in all system sizes of 1/4,3/8 1/2 and 5/8
These extension kits are available in lengths of 1m up to 6m to suit customers requirements.

Wall mounting brackets for Condensing unit of air-conditioning system. These brackets are designed to be easy to install and come complete with all necessary hardware to mount then to the wall.
They are easy to adjust and also benefit from a levelling adjustment for uneven walls. There are two mounting positions for each arm enabling more choice of equipment mounting in difficult areas.

Supplied with the kit are rubber anti vibration mounting feet to adsorbe any compressor vibration on start-up of unit.

Interconnecting system cables to carry signal and power from Evaporator unit to the Condensate unit. Cable sizes are 2.5mm2-3 core flex for the power supply and 0.75mm2-2 core flex for signal wire. Length of cable is 4m

High efficiency replaceable filters to remove odours and particles. Filters should be checked and replaced if necessary to maintain optimum performance of your air conditioning system.

Vent hose extension for the KYR35GW/X1c portable air-conditioning unit. Plastic corrugated hose that can be adjusted in length to suit requirements. Supplied with threaded connecting ring to attach to existing vent hose to add up to 2m extra in hose length.